| Cutting: |
Powered by an inverter-controlled, energy efficient AC motor, the 60 Series cuts up to 2,000,000 denier at speeds up to 375 meters per minute. A durable, high performance double reduction belt drive employs a main shaft sprocket located between radial bearings for increased life and quiet operation.
|
| Presser Wheel: |
The 60 Series cutter uses a large diameter (18 inch), pneumatically loaded presser wheel. This load adjusts easily from the operating side of the cutter.
|
| Guide System: |
The long 48 inch tow guide provides proper tow presentation to the reel. A trumpet guide precisely confines tow at the critical area of reel contact to prevent filaments from escaping and producing super-overlengths. This trumpet guide swings away for lace-up and reel installation. The guide system is located on the operating side of the cutter.
|
| Configuration: |
A welded, monopost, self-supporting frame design provides access to three sides of the discharge chute.
|
| Options: |
An extensive list of options provides staple fiber producers an opportunity to configure the 60 Series cutter to their precise needs; from tow heights to speeds, total denier to cut lengths, custom drives to special paints; DM&E provides these to your requirements. Call or email for details.
|
| Cutter Reels: |
The 60 Series cutter uses radial blade reels. Installation of the 60 Series hub on existing reels allows for reel interchange.
|
| Safety: |
Swing-open front and rear reel guards electrically interlock with the motor drive to prevent accidental starting.
|
| Power Requirements: |
380/460 volts, 3-phase, 50/60 Hz, AC |
| Weight: |
Approximately 2000 lbs. |
| Warranty: |
The 60 Series is warranted for one year against defects in material and workmanship. Cutter reels and expendable wear items are excluded.
|
| Price/Delivery: |
Quotation upon request (specify right to left or left to right operation) |
| F.O.B.: |
Shelby, NC, USA |
site search
