| 40 Series Cutter || 60 Series Cutter || 90 Series Cutter |

60 Series Tow Cutter  The DM&E 60 Series radial blade tow cutter economically and rapidly processes tow into staple fiber with precisely controlled cut length. The straightforward layout and unique features of the cutter provide efficient operation and maintenance. click here for CAD layout        Maximum denier (Opt) (Dual Cutter Opt) 2,000,000 (222 ktex)1 3,000,000 (333 ktex)1 4,000,000 (444 ktex)1 Maximum speed up to 375m/min2 Capacity 10,266lbs/hr (4656kg/hr)3 Horsepower 10hp (7.5W) Tow heights 48" (1219mm), 57" (1448mm) Cutting circumference 60" (1524mm) Vertical blade exposure 1 11/16" (43mm)4 Cut length 1/8" to 7 1/2" (3mm to 191mm) Blade type Disposable Reel attachment Drawbar Presser wheel operation Pneumatic Presser wheel diameter 18" (457mm) Presser wheel material Phenolic Drive type AC Vector drive Motor TEFC, energy-efficient Voltage Phase Amps 380/460 @ 50/60Hz 3 20 Air 1 CFM @ 100 psig Monopost frame Standard Adjustable discharge chute Standard Discharge diameter 16" (406mm) Paint Urethane Weight 2000lbs (900kg) Size (LxWxH) 75"x32"x66" (1905x813x1676mm) Matching tension stand 200 Series or 300 Series (1) Short cut lengths will reduce this value (2) Minimum continuous running speed is 1/3 maximum speed (3) At maximum standard denier and speed (4) Varies with reel configuration - Call DM&E for details

Cutting:	Powered by an inverter-controlled, energy efficient AC motor, the 60 Series cuts up to 2,000,000 denier at speeds up to 375 meters per minute. A durable, high performance double reduction belt drive employs a main shaft sprocket located between radial bearings for increased life and quiet operation.
Presser Wheel:	The 60 Series cutter uses a large diameter (18 inch), pneumatically loaded presser wheel. This load adjusts easily from the operating side of the cutter.
Guide System:	The long 48 inch tow guide provides proper tow presentation to the reel. A trumpet guide precisely confines tow at the critical area of reel contact to prevent filaments from escaping and producing super-overlengths. This trumpet guide swings away for lace-up and reel installation. The guide system is located on the operating side of the cutter.
Configuration:	A welded, monopost, self-supporting frame design provides access to three sides of the discharge chute.
Options:	An extensive list of options provides staple fiber producers an opportunity to configure the 60 Series cutter to their precise needs; from tow heights to speeds, total denier to cut lengths, custom drives to special paints; DM&E provides these to your requirements. Call or email for details.
Cutter Reels:	The 60 Series cutter uses radial blade reels. Installation of the 60 Series hub on existing reels allows for reel interchange.
Safety:	Swing-open front and rear reel guards electrically interlock with the motor drive to prevent accidental starting.
Power Requirements:	380/460 volts, 3-phase, 50/60 Hz, AC
Weight:	Approximately 2000 lbs.
Warranty:	The 60 Series is warranted for one year against defects in material and workmanship. Cutter reels and expendable wear items are excluded.
Price/Delivery:	Quotation upon request (specify right to left or left to right operation)
F.O.B.:	Shelby, NC, USA