|
The DM&E Pneumatic Presser Wheel makes some of the benefits of the presser wheel mechanism found on all DM&E cutters available to owners of Mark IV and Mark V cutters. The Pneumatic Presser Wheel uses an adjustable, large diamter presser wheel. A larger presser wheel creates a shallower incidence angle, resulting in a more gentle cutting action. Regulated, pneumatic loading of the presser wheel replaces the mechanical spring, providing maximum protection against costly reel damage from knots and dull/broken blades. A custom control panel allows for quick adjustment of the cutting force. The presser wheel to blade clearance adjusts simply. The unit arrives on site ready to install.
|
Presser wheel diamater:
|
Mark IV
Mark V
|
18in. [457mm]
26 in. [660mm]
|
|
Blade exposure:
|
Mark IV
(opt.)
Mark V
Blade gap
|
1 11/16in. [43mm]
3/8 to 2 2/3 in. [9.5 to 70mm]
3 3/8in [86mm]
0 to 1/2in. [0 to 13mm]
|
|
Max. load (@ pressure wheel)
Air
Paint
Weight
|
2500 lbs. [1134kg]
1 CFM [4.7x10-4m3/s] @ 100 psig [689 kPa]
Urethane
250 lbs. [113kg]
|
|
|
