For:  | 40 Series Cutters || 60 Series Cutters || 90 Series Cutters |

CUTTER REELS - 60 Series

• With Blade Support Pins
• Blade Exposure - 2.750 in [70 mm]
• Capacity to 3,000,000 d [333 ktex]
• Uses cutter blade 02.80.30

 CONFIGURATIONS:

• 8 to 20 blades - round pins
  cut lengths 7.5 in [191 mm] to 3 in [76 mm]
• 21 to 39 blades - flat pins
  cut lengths 2.86 in [73 mm] to 1.54 in [39 mm]
• 40 to 52 blades - diamond pins
  cut lengths 1.50 in [38 mm] to 1.13 in [29 mm]
  17-4 HT H1100 Stainless Steel
• 53 to 60 blades - thin flat pins
  cut lengths 1.11 in [28 mm] to 1.0 in [25 mm]
  17-4 HT H1100 Stainless Steel

 

• No Blade Support Pins - Flock Type
• Blade Exposures to 1.18 in [30 mm]
• Nominal Cutting Diameter - 17.875 in [454 mm]
• Nominal Cutting Circumference - 54 in [1372 mm]
• Cut Lengths Available - 1.00 in [25 mm] to 0.188 in [4.8 mm]
• Stainless Steel Top and Bottom Blade Holders
• Ring Support Pins 17-4 HT H900 Stainless Steel
• Capacity to 1,000,000 d [111 ktex]
• Uses Cutter Blade 02.80.20

 CONFIGURATIONS:

• Blade Exposure - 0.500 in [12.7 mm]
  60 to 108 blades - cut lengths 1.00 in [25 mm] to 0.500 in [12.7 mm]
• Blade Exposure - 0.500 in [12.7 mm]
  109 to 288 blades - cut lengths .49 in [12.4 mm] to 0.188 in [4.8 mm]
• Blade Exposure - 0.750 in [19 mm]
  60 to 108 blades - cut lengths 1.00 in [25 mm] to 0.500 in [12.7 mm]
• Blade Exposure - 0.750 in [19 mm]
  109 to 288 blades - cut lengths .49 in [12.4 mm] to 0.188 in [4.8 mm]
• Blade Exposure - 1.00 in [25 mm]
  60 to 108 blades - cut lengths 1.00 in [25 mm] to 0.500 in [12.7 mm]
• Blade Exposure - 1.00 in [25 mm]
  109 to 288 blades - cut lengths .49 in [12.4 mm] to 0.188 in [4.8 mm]
• Blade Exposure - 1.18 in [30 mm]
  60 to 108 blades - cut lengths 1.00 in [25 mm] to 0.500 in [12.7 mm]
• Blade Exposure - 1.18 in [30 mm]
  109 to 288 blades - cut lengths .49 in [12.4 mm] to 0.188 in [4.8 mm]

 

• Ring Support Pins Only - Flock Type
• Blade Exposures to 0.75 in [19 mm]
• Nominal Cutting Diameter - 17.875 in [454 mm]
• Nominal Cutting Circumference - 54 in [1372 mm]
• Cut Lengths Available - 0.750 in [19 mm] to 0.120 in [3 mm]
• Top and Bottom Blade Holders/17-4 HT H900 Stainless Steel
• Ring Support Pins/17-4 HT H900 Stainless Steel
• Uses Cutter Blade 02.80.10

 CONFIGURATIONS:

• Blade Exposure - 0.375 in [9.5 mm]
  75 to 450 blades - cut lengths 0.75 in [19 mm] to 0.120 in [3 mm]
• Blade Exposure - 0.500 in [12.7 mm]
  75 to 450 blades - cut lengths 0.75 in [19 mm] to 0.120 in [3 mm]
• Blade Exposure - 0.750 in [19 mm]
  75 to 450 blades - cut lengths 0.75 in [19 mm] to 0.120 in [3 mm]

 

• Extreme Duty With Blade Support Pins
• Blade Exposure - 1.68 in [42.7 mm]
• Capacity to 2,000,000 d [222 ktex]
• Uses Cutter Blade 02.80.20

 CONFIGURATIONS:

• 8 to 20 blades - super pins
  cut lengths 7.5 in [191 mm] to 3 in [76 mm] 17-4 HT H1100 Stainless Steel
• 21 to 40 blades - super pins
  cut lengths 2.86 in [73 mm] to 1.5 in [38 mm] 17-4 HT H1100 Stainless Steel

 

• Extreme Duty With Blade Support Pins
• Blade Exposure - 2.75 in [70 mm]
• Capacity to 3,000,000 d [333 ktex]
• Uses Cutter Blade 02.80.30

 CONFIGURATIONS:

• 8 to 20 blades - super pins
  cut lengths 7.5 in [191 mm] to 3 in [76 mm] 17-4 HT H1100 Stainless Steel
• 21 to 40 blades - super pins
  cut lengths 2.86 in [73 mm] to 1.5 in [38 mm] 17-4 HT H1100 Stainless Steel

OPTIONS

• Adapt to Lummus Mk 3 or Mk 4 Cutter
• Adapt to 60 Series Reel Attachment Device
• Special Top Cover
• Special Bottom Cover
• Special Tow Notch
• Special Construction Material
• Hard Anodized Aluminum
• Non Hard Anodized Aluminum
• Labyrinth Ring Bottom Cover/Phenolic
• Labyrinth Ring Bottom Cover/Aluminum
• Labyrinth Ring Bottom Cover/Hard Anodized Aluminum