For:  | 40 Series Cutters || 60 Series Cutters || 90 Series Cutters |

CUTTER REELS - 90 Series

• With Blade Support Pins
• Fits 90 Series Cutter - adaptable to several manufacturer's cutters
• Nominal Cutting Diameter - 26.785 in [680 mm]
• Nominal Cutting Circumference - 90 in [2286 mm]
• Cut Lengths Available - 7.5 in [191 mm] to 1.00 in [25 mm]
• Stainless Steel Top and Bottom Pin Holders
• Stainless Steel Blade Support Pins
• Split Phenolic Covers (interchangeable reel to reel)
• With Blade Support Pins
• Blade Exposure - 1.68 in [42.7 mm]
• Capacity to 2,000,000 d [222 ktex]
• Uses Cutter Blade 02.80.20

 CONFIGURATIONS:

• 12 to 15 blades - round pins
  cut lengths 7.5 in [191 mm] to 6 in [152 mm]
• 16 to 30 blades - round pins
  cut lengths 5.6 in [143 mm] to 3in [76mm]
• 31 to 59 blades - flat pins
  cut lengths 2.9 in [74 mm] to 1.5in [38.1mm]
• 60 to 72 blades - diamond pins
  cut lengths 1.48 in [37 mm] to 1.25in [32 mm]
  17-4 HT H1100 Stainless Steel
• 73 to 108 blades - thin diamond pins
  cut lengths 1.23 in [31 mm] to .83 in [21 mm]
  17-4 HT H1100 Stainless Steel

 

• 02.30.80 With Blade Support Pins
• Blade Exposure - 3.38 in [85.7 mm]
• Capacity to 6,000,000 d [666 ktex]
• Uses Cutter Blade 02.80.30

 CONFIGURATIONS:

• 12 to 15 blades - round pins
  cut lengths 7.5 in [191 mm] to 6 in [152 mm]
• 16 to 30 blades - round pins
  cut lengths 5.6 in [143 mm] to 3in [76mm]
• 31 to 59 blades - flat pins
  cut lengths 2.9 in [74 mm] to 1.5in [38.1mm]
• 60 to 72 blades - diamond pins
  cut lengths 1.48 in [37 mm] to 1.25in [32 mm]
  17-4 HT H1100 Stainless Steel
• 73 to 108 blades - thin diamond pins
  cut lengths 1.23 in [31 mm] to .83 in [21 mm]
  17-4 HT H1100 Stainless Steel

OPTIONS

• 90 Series Cutter Reel
• Adapt to 90 Series Reel Attachment Device
• Special Top Cover
• Special Bottom Cover
• Special Tow notch
• Special Construction Materials
• Labyrinth Ring Bottom Cover/Phenolic
• Labyrinth Ring Bottom Cover/Aluminum
• Labyrinth Ring Bottom Cover/
• Hard Anodized Aluminum